TT-388 (32 & 48KW)
Temperature Control Unit
High temperature oil unit for temperature up to 360°C
Heating capacity: 32 kW or 48 kW
Operational use:
Moulds in the die casting industry, small rollers and plates
Model Z pump with axial face seal
Model A pump with seal less magnetic drive
TECHNICAL DATA: |
TT-388 Z or A (32 kW) |
TT-388 Z or A (48 kW) |
Temperature range | up to 360°C with heat transfer oil TOOL-THERM SH-3 | |
Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|
Flow control | electronically, with digital display and automatic control of the minimum flow. | |
Heating capacity | 32 kW | 48 kW |
Switchable in stages | 8 / 24 | 8 / 8 / 16 / 16 |
Cooling capacity | 150 kW at 360° | 230 kW at 360° |
Pump capacity | motor 1,8 kW | |
Pressure mode | max. 5,5 bar / max. 100 l/min | |
Vacuum mode | vacuum max. 8 mH2O | |
Model Z | pump with axial face seal and triple bearing system | |
Model A | pump with seal less magnetic drive | |
Temperature measurement at the mould | yes | no |
Leakstopper and mould drain | yes | no |
Expansion tank capacity | 46 litres | 46 litres |
Filling Amount | 27 litres | 70 litres |
Expansion volume | 36 litres | 36 litres |
Connections | ||
Oil circuit | 3/4″ BSP female thread | 1“ BSP male thread |
Cooling water | inlet water filter outlet non-return valve |
1“ BSP female thread 1“ BSP female thread |
Dimensions (L×W×H) | 1‘240 × 480 × 1‘500 mm | 1‘240 × 720 × 1‘500 mm (incl. castors) |
Weight | approx. 235 kg empty | approx. 335 kg empty |
Colour | silvergrey RAL 7001 |
Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)
All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.