Temperature Control Unit
Oil unit for temperatures up to 250°C
Available as double-circuit unit with 2 x 8 kW

Operational use:
plastic / die casting moulds, small rollers and plates

Model Z    pump with axial face seal
Model A    pump with seal less magnetic drive




Temperature range up to 250°C with heat transfer oil TOOL-THERM SH-3
Temperature control self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Flow control electronically, with digital display and automatic control of the minimum flow.
Heating capacity 8 kW 2 x 8 kW
Switchable in stages 3 / 5 2 x 3 / 5
Cooling capacity 60 kW
at 250°C circulating temperature
2 x 60 kW
Pump capacity motor 1,8 kW
Pressure mode max. 5,5 bar / max. 100 l/min
Vacuum mode vacuum max. 8 mH2O
Model Z pump with axial face seal and triple bearing system
Model A pump with seal less magnetic drive
Temperature measurement at the mould yes yes
Leakstopper and mould drain yes yes
Expansion tank capacity 14 litres 1 x 46 litres
Filling Amount 9 litres 1 x 30 litres
Expansion volume 11 litres 1 x 36 litres
Oil circuit 3/4″ BSP female thread
Cooling water inlet  water filter  1″ BSP female thread
outlet  non-return valve  1″ BSP female thread
Dimensions (L×W×H) 1’130 × 390 × 1’070 mm 1’240 × 720 × 1’400 mm (incl. castors)
Weight approx. 150 kg empty approx. 325 kg empty
Colour silvergrey RAL 7001

MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.


Scroll to Top