TT-248
Temperature Control Unit
Powerful, small oil unit for temperatures up to 200°C
Operational use:
moulds up to 600 kg
TECHNICAL DATA: |
||
Temperature range | up to 200°C with heat transfer oil TOOL-THERM SH-3 | |
Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|
Flow control | electronically, with digital display and automatic control of the minimum flow. | |
Heating capacity | 8 kW | |
Cooling capacity | approx. 20 kW at 200°C circulating temperature | |
Pump capacity | motor 1,8 kW | |
Pressure mode | max. 5,5 bar / max. 100 l/min | |
Vacuum mode | vacuum max. 8 mH2O | |
Temperature measurement at the mould | yes | |
Leakstopper and mould drain | yes | |
Expansion tank capacity | 8 litres | |
Expansion tank capacity | 8 litres | |
Expansion volume | 6 litres | |
Connections | ||
Oil circuit | 3/4″ BSP female thread | |
Cooling water | inlet: water filter 1/2″ BSP female thread outlet: 1/2″ BSP female thread |
|
Dimensions (L×W×H) | 880 × 360 × 920 mm, incl. castors | |
Weight | approx. 120 kg empty | |
Colour | silvergrey RAL 7001 |
Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)
All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.